|
|
|
 |
| |
| Vortex
Fluid Purifier Series--products
introduction |
 |
| ¡¡¡¡
Vortex fluid purifier has advantages of centrifuge and of the cyclone, the separation of purification results is up to the effects of low-speed centrifuges, sludge discharge with low water content, less fluid loss, continuous operating and purifying, simple structure, less maintenance ; In addition, the technology include: stable and reliable purifying effect cycle of sewage, low-cost equipment. At present, this technology has surpassed the same technology at home and abroad.
This technology can be widely
used in metallurgy, machinery, petroleum, chemical
industry, production and environmental protection
industries. This equipment can fully substitute
the traditional one, the secondary sedimentation
tank in industrial waste water treatment system
and greatly reduce the area to reduce water consumption.
This device can separate 90% in size of or more
than 15-micron solid particles from fluid satisfying
technological requirements of industrial spray,
cooling, cleaning system, an alternative to expensive,
complex automatic filter. In the field of deep
purification, this device can be used as front-end
pre-processing for centrifuge or filter press
and membrane filter, can save a lot of investment
in equipment and operating and maintenance costs,
and market price is Lower than automatic filter,
centrifuge, as well as 1 / 3 price of similar
imported products, and even better results in
their market prospects.
This technology has supplied an advanced and efficient, stable, reliable and low-cost, low input, low-maintenance applications in industrial wastewater treatment system, the application of this technology will promote the economic and social benefits to a win-win situation.
|
 |
|
|
¡°Feirui¡± brand vortex fluid purifier based on the theory of centrifugal separation use for separating precipitation in liquid. The Unique internal accelerated motion produce high-speed rotating vortex, which efficiently separate the solid impurities in liquid.¡¡¡¡
¨’ A detachable 3¦Ìm to 9mm solid
particles greater than the proportion of liquid
is expected. In the low-precision separation system,
the effect of separation for 74¦Ìm level solids
can reach more than 95%; in the high-precision
separation systems, 40¦Ìm level solids is up to
98% of the separation effect.
¨’ 800 Series stand-alone capacity of 120m3
/ hr is capable to deal with suspended solids
content of up to 30000mg/L of water to meet a
variety of adverse circumstances under water treatment
requirements.
¨’ Large flow series can increase stand-alone capacity
to 1200 m3 / hr, and to
ensure that the favorable treatment effect with
low pressure loss, and unified in-out of discharging
holes facilitate the realization of industrial
sewage automation. |
|
| ¡¡¡¡ Vortex
Fluid Purifier Series--products
advantages |
|
|
Feirui vortex fluid purifier filters
do not need filter net, filter plate, so it neither
happen blocking like net filters and pan filters nor
change filter bags at regular time like bag filters.
filtering separation is endless in a row.
Sewage discharging without repeated flushing , save
sewage water, and there is no water flow loss.
In the process of separation and purification, There
is no movement of equipment, nor wear and tear of mechanical
movement
No movable components , and no spare parts needed
to maintain, non- maintenance, 100% maintenance-free
operation. An investment, life-long benefits, once and
for all.
Zero running cost, no need external power, no need to replace parts, 100% maintenance-free operation, to reduce energy consumption.
Wide range of applications: stand-alone flow is 1m3/h-1200m3/hr.
Allowed the largest particle access to separator:
9mm.
Allowed the capacity of pollution access to separator
30000mg /L.
The scope of work pressure: 1-16bar.
The maximum working temperature: 98 ¡æ.
Notes:
The separation results of the fine fibers on the surface of liquid are not well.
Not suitable for sludge dewatering.
|
| ¡¡¡¡ Vortex
Fluid Purifier Series--Drawing
of working principle |
|
|
Comparison between Vortex fluid purifier and the traditional cyclone separator |
|
Items |
Traditional cyclone separator |
Vortex fluid purifier |
Theory |
Rotating fluid flow
produce more centrifugal force than gravity |
Same |
Structure |
Tube is up, cone is down |
Internal and external tubes |
Location of entrance |
At the upper part of swirl chamber |
At the lower part of swirl chamber |
Fluid route |
Spiral move down, and return up, a free vortex and forced vortex co-exist, can not eliminate the phenomenon of short circuit |
Spiral move up in swirl chamber until the end of the separation to form simple forced vortex |
Composition of sand flash |
Sand discharging hole always open, meanwhile carrying large amounts of water, fluid loss is serious |
Constantly accumulate
sand, to discharge high concentration of sediment
at regular time |
Results of separation |
If flow velocity at entrance is too high that will affect the flow field inside swirl chamber, and limit separation effect improvin |
The flow filed inside swirl chamber is simple forced vortex to increase flow velocity at entrance, and improve separation effect |
Handling capacity |
Narrow diameter of swirl chamber can increase the separation effect ,but reduce the stand-alone handling capacity |
Achieve the desired
effect of separation, not reduce the handling
capacity |
Operability |
Have to constantly adjust the flow at sand discharging hole in order to meet liquid with different solid volume |
Cyclical sand discharging,
do not have to adjust flow |
 
|
| ¡¡¡¡ Vortex
Fluid Purifier Series--Simulation
technology map |
|
©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬
©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬©¬
|
|
|
 |
|
